Thermal camera:

The setup can be delivered with the following FLIR camera’s;

  • FLIR VUE thermal camera: The FLIR VUE is the basic thermal camera. It provides standard thermal image. With the FLIR VUE you can control tilt, palettes, digital zoom and color settings.
  • FLIR VUE Pro thermal camera: It is the same as the standard FLIR VUE, but than provided with an SD recording capture module. Vue Pro records 8-bit digital video in MJPEG or H.264 formats and 14-bit still imagery to a removable micro-SD card so you won’t lose any of your data to transmission loss. Imagery is saved to the micro-SD card and can be retrieved either from the card or by plugging the camera into a USB cable, where your computer will see it as a storage device.
  • FLIR VUE Pro_R (radiometric) thermal camera: The FLIR VUE Pro_R is the newest model of FLIR thermal camera series. Vue Pro R captures regular JPEGs and fully radiometric R-JPEGs that can be fully analyzed in FLIR Tools thermography analysis and reporting software. It also records 8-bit digital video in MJPEG or H.264 formats, and 14-bit TIFFs right on the camera so you won’t lose any of your data to transmission loss. Imagery is saved to the micro-SD card and can be retrieved either directly from the card or by plugging the camera into a USB cable, where your computer will see it as a storage device.

With the FLIR VUE Pro_R you can control tilt, palettes, digital zoom, auto hotspot detection and color settings.

  • FLIR TAU2 thermal camera: The FLIR TAU2 is an advanced version of the FLIR cameras. With the FLIR TAU2 you can control tilt, palettes, digital zoom, auto hotspot detection, color settings, isotherm and delta-t (explanation below).
  • FLIR TAU2_R (radiometric): The FLIR TAU2_R is the most advanced FLIR thermal camera. With the FLIR TAU2_R you can control tilt, palettes, digital zoom, auto hotspot detection and color settings. However, with the TAU2 version you also are able to control the Isotherm and delta-t.

What can you do with radiometric Isotherm and Delta-t?
Delta-t and Isotherm is a good feature to have within professional application. This is best explained with an example: when you do search and rescue (SAR human detection) you can set the Isotherm on (for example) 36 degree and set delta-t on 1 degree. Temperatures on 36 degree will be highlighted very strong descending to 35 and 37 (1 degree Delta-t), so 35 degree will be little less highlighted then 36 degree. This way you can specify an temperature which make spotting this temp easier.


 One for all: 3-in-1 thermal gimbal with quickrelease system (including FLIR camera)

We proudly present the new professional 3-in-1 thermal FLIR thermal gimbal with advanced LCD control unit. It is the most advanced and professional thermal gimbal at this moment.

Benefits of the new 3-in-1 quickrelease thermal gimbal:

  • Advanced separate remote control of the FLIR camera, remotely control: tilting, palettes, digital zoom, camera settings, playback, radiometric isotherm and delta-t. This settings can be adjusted while the UAV is UAV in the air (tested till 1000 meter)
  • Use the thermal gimbal on UAV, handheld and photo pole (ideal for inspection on locations where permit cannot be obtained)
  • It operates standalone, therefore it can also easily be rebuild to any other carrier (which can carry payload of 260g). It is very likely that within several months from now, more UAV will be released with better flight time, better specifications than the UAV’s we have access to nowadays. It will be good to know, that your investment of an thermal setup can be easily re-installed on future released UAV.
  • Simultaneously daylight and thermal view
  • Not vulnerable for firmware updates; Since it operates standalone, it cannot be influenced by any firmware update on the UAV.

Product Description

We have several options for thermal recording:

  • DVR recorder installed on gimbal: This is an standard DVR recorder with LCD screen installed on the Gimbal side for recording the thermal video. Available for VUE and TAU2.
  • SD Pro capture module: This is the SD capture module which originally comes from the VUE Pro, we can install this unit onto the TAU2. It records video and images. The captured images are radiometric, so can be used for afterwards analyzing.
  • Teax thermal capture module (only for TAU2_R): For high-end applications where RAW thermal capture is required. The Teax thermal capture module records 9hz video for afterwards thermal analyzing. Specifications of the thermal capture module can be found here.

Thermal storage option:

The 3-in-1 thermal gimbal is compatible with:


– 3 axis thermal gimbal
– Power cable (for installation UAV)
– Included standalone video transmission (5.8Ghz)
– 7″ LCD diversity 5.8Ghz receiver
– 7″ LCD holder for mounting on UAV controller (dual screen)
– FLIR advanced LCD touch controller USA 915,6MHZ / EU 869,5Mhz (for remote controlling the thermal camera)
– Mounting lock for FLIR controller (for mounting on UAV controller)
– FLIR thermal camera
– Flight case

Currently we have mounting adapters available for
– DJI Phantom 3 (advanced/pro)
– DJI Phantom 4 (pro)
– DJI Inspire 1 (all versions)
– DJI Matrice 100
– DJI Matrice 600 (new)
– Yuneec Q500
… More coming

Compatible with:

With the ‘automatic hotspot detection’ you are able to automatically detect heat source. This way you will automatically be notified when detecting (for example) an human temperature when scanning an area.

Automatic hotspot detection:

If you have purchased the thermal gimbal for the DJI Phantom 4 but also having an Inspire 1 (for example), then you easily can swap the thermal gimbal between these UAV’s.

The thermal gimbal can also be installed onto the optional handheld and optional 10m carbon fibre photopole. This way you can use it indoor and outdoor in situations where you are unable to fly (permits/restrictions).

The 3in1 thermal gimbal operates standalone (it only needs power from UAV). This means that it is future proof and can be installed on other UAV also. Whenever you decide to upgrade with another carrier, you simply can rebuild the thermal setup to this new UAV also.

With the FLIR LCD touch control unit you have full remotely control over the FLIR thermal camera/gimbal. It allows you control over the Tilt, Palettes, Digital zoom, AGC settings, automatic hotspot detection, Isotherm and Delta-t.

With the dual screen you have simultaneously daylight and thermal view. Both cameras can be controlled separately. It has proven that the daylight camera is essential in most applications.

 Sony WX500 (or RX100) gimbal V2 (30x optical zoom) gimbal for Matrice 100

New model V2. What’s new in the upgraded V2 Sony gimbal:
> Sony WX500 30x optical zoom is now included
> SD card is accessible without need of removing Sony camera from gimbal
> Sony camera now is powered from UAV
> Some minor allround improvements

Sony WX500 (or RX100) gimbal:
> Finally it is here. The Sony WX500 gimbal for the DJI Matrice 100.
With the Sony WX500 camera on your M100 you will be able to create amazing images and videos.
> The Sony RX100 gimbal is included with a touch LCD remote control which allows you to remotely control: tilt, shutter, record and optical zoom. Because of the optical zoom the WX500 setup is very useful for inspections.
> The video feedback (FPV) goes through included lighbridge N1 so provides you optimal range and sharp video feedback.
> Also compatible with Sony WX500, this camera has 30x optical zoom. The optical zoom is also remotely controlled.
> +-600g total including WX500 camera for Matrice.
> Video feedback (FPV) on DJI Go App.

Product Description

Compatible cameras are: Sony RX100II, RX100III, RX100IV and WX500.


 Tripod for DRONExpert FLIR thermal setup (DJI Phantom 3, 4, Inspire 1 and Matrice 100)

With the optional tripod you will be able to mount the tablet (for daylight view) and the 7″ LCD (for thermal view). The included TB48/TB47* battery holder can be connected to both screens (and DJI controller).
* Battery not included.

Optional tripod:

 Professional flightcase for DJI Inspire and Matrice (airtight and waterproof) with integrated charging system

Professional flight case for DJI Matrice 100 & DJI Inspire 1 with military grade for high strength and durability, airtight and waterproof.
Flight cases can be stacked on top of each other and each case has room for 10 x TB47/48 batteries, 4 of these batteries will be charged automatically (when connecting the power plug). It takes around 40 minutes to charge an TB48 battery. Battery charging is in chain (1st battery full it will charge 2nd battery etc.). It also has USB power for charging controller/tablet.

The DJI Inspire 1 or Matrice 100 can take of directly from the flight case.

Product Description

WEIGHT: 13 kg
DIMENSIONS: 67 x 66 x 59 cm
MATERIAL: LLDPE Polyethylene
BUTTERFLY LOCK: Yes, stainless steel
CLOSEABLE: Yes, airtight and waterproof
COLOR: Black
MAX. BUOYANCY: 159 kg.


POWER: 180Watt
CHARGING TIME: 45 minutes to charge a TB48 battery. Charges in chain (when 1st is full the 2nd starts charging etc.)
BATTERIES: Room for 4 batteries to charge
USB CONNECTIONS: x 2 for iPad for instance


The gimbal package contains: